{"title":"Carbon Fibre \u0026 Composite Filament","description":"\u003cp\u003eComposite 3D printing filament reinforced with carbon fibre or glass fibre for stiffer, stronger and engineering-focused parts.\u003c\/p\u003e","products":[{"product_id":"esun-epa-cf-nylon-carbon-fiber-1-75mm-filament-1kg","title":"eSun ePA-CF (Nylon + Carbon Fiber) 1.75mm Filament 1kg","description":"\u003cp\u003eDeveloped based on nylon 6\/66 copolymer, adding \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e20% carbon fiber\u003c\/strong\u003e \u003c\/span\u003e\u003c\/em\u003egreatly enhances the strength, rigidity and toughness of nylon, and can replace metal materials in many occasions; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance make it suitable for printing durable parts. High temperature resistance, heat deformation temperature up to 155℃; Low shrinkage, it is not easy to warp and crack when printing, and the surface of printed models is matte and delicate.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDOWNLOAD TECHNICAL DATA SHEET \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.esun3d.com\/uploads\/eSUN_ePA-CF-Filament_TDS_V4.0.pdf\" style=\"color: #2b00ff;\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eDOWNLOAD eSun Product Guide \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.esun3d.com\/epa-cf-product\/\" style=\"color: #2b00ff;\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eNOTE:\u003c\/p\u003e\n\u003cp\u003e1. \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eDry the filaments\u003c\/strong\u003e \u003c\/span\u003e\u003c\/em\u003e(70℃\/\u0026gt; 12h) before printing to achieve the best printing effect. It is recommended to use them together with eBOX when printing.\u003c\/p\u003e\n\u003cp\u003e2. PA-CF tends to be highly rigid and excessive force while feeding through extruder may cause it to bend and break.\u003c\/p\u003e\n\u003cp\u003e3. It is highly recommended to use \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehardened steel nozzle\u003c\/strong\u003e \u003c\/em\u003e\u003c\/span\u003ewhile printing with ePA-CF. It can be highly abrasive on standard brass nozzle and cause them to wear out. Similarly, avoid using extruder with brass gears.\u003c\/p\u003e\n\u003cp\u003eSome videos to consider watching to help you get started with printing PA-CF filaments.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=xjmwNh4Hqfk\" target=\"_blank\"\u003ehttps:\/\/www.youtube.com\/watch?v=xjmwNh4Hqfk\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=A6Df4I4SXJE\" target=\"_blank\"\u003ehttps:\/\/www.youtube.com\/watch?v=A6Df4I4SXJE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER: \u003cb\u003eBITS4BOTS LIMITED \u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003enor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries. \u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch2\u003e Specification\u003c\/h2\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter:\u003c\/td\u003e\n\u003ctd\u003e1.75mm (+\/- 0.05mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtrusion Temp\u003c\/td\u003e\n\u003ctd\u003e260 ~ 300 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Plate Temp  (OPTIONAL)\u003c\/td\u003e\n\u003ctd\u003e80 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003eProduct Description:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCarbon fiber reinforced nylon filament\u003c\/p\u003e\n\u003cp\u003eHigh Strength, High Rigidity, Good Toughness, Wear Resisting\u003c\/p\u003e\n\u003cp\u003eGood flame resistance, Flame-retardant Level: UL94-V2;\u003c\/p\u003e\n\u003cp\u003ePrint temperature range: 260~300℃\u003c\/p\u003e\n\u003cp\u003ePrint Base temperature: 80℃\u003c\/p\u003e\n\u003cp\u003ePrint Speed：30-60 mm\/s;\u003c\/p\u003e\n\u003cp\u003eMove Speed：90-150mm\/s\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\" style=\"font-weight: 400;\"\u003e\u003cstrong\u003eCarbon Fiber Filled Nylon\u003c\/strong\u003e - 80% Nylon Coupled with 20% Carbon Fiber. High Strength and Rigidity. High Toughness. Wear Resistance. High Precision. Low Shrinkage. Heat Resistance 115°C. Flame Retardance UL94-V2. Compatible with Most of 3D Printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting smoothly, odorlessness, matte finish printing effect.\u003c\/li\u003e\n\u003cli\u003eHigh Strength, High Rigidity, Good Toughness, Wear Resisting, Fitting to 3D print industrial parts.\u003c\/li\u003e\n\u003cli\u003eCompared with Nylon, it has lower shrink rate and distortion, high accuracy without warped edge.\u003c\/li\u003e\n\u003cli\u003eStainless steel nozzle shall be needed instead of quick-wear bronze nozzle when using CFRPA filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"eSun","offers":[{"title":"Black \/ 1.75mm \/ 1kg","offer_id":8145990549605,"sku":"EPA-CF175NE1","price":89.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/products\/49.png?v=1659492531"},{"product_id":"esun-epa12-cf-1-75mm-filament-1kg","title":"eSun ePA12-CF (Nylon + Carbon Fiber) 1.75mm Filament 1kg","description":"\u003cp data-mce-fragment=\"1\"\u003eePA12 is a product developed based on PA12; low water absorption rate, the size of the printed parts is less affected by humidity and temperature.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e ePA12 has high toughness and high impact resistance, and can be used to print durable parts;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUp to 165% elongation at break and excellent fatigue resistance;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSelf-lubricating and wear-resistant performance, can print mechanical gears;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHigh-temperature resistance, heat distortion temperature of 100℃, can be used for temperature resistant parts;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLow shrinkage, not easy to warp and crack during printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSelling points: low moisture absorption; heat resistance; high toughness; high impact resistance; abrasion resistance; high dimensional stability; excellent printability.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eDISCLAIMER: \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eBITS4BOTS LIMITED \u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003enor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"eSun","offers":[{"title":"Natural \/ 1.75mm \/ 1kg","offer_id":42591935529115,"sku":"EPA12-CF175N1","price":155.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/products\/51.png?v=1659492608"},{"product_id":"esun-epaht-cf-1-75mm-filament-0-75kg","title":"eSun ePAHT-CF (Nylon + Carbon Fiber) 1.75mm Filament 0.75kg (Discontinued)","description":"\u003cp align=\"left\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis has now been discontinued by eSun. This is the last of the stock we have.\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eA material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃;  low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-node=\"5b951ea1c460f\" class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-5b951ea1c460f\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv data-node=\"5b951ea1c4c6a\" class=\"fl-col-group fl-node-5b951ea1c4c6a\"\u003e\n\u003cdiv data-node=\"5b951ea1c4e58\" class=\"fl-col fl-node-5b951ea1c4e58\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"5b951ea1c6c82\" class=\"fl-module fl-module-rich-text fl-node-5b951ea1c6c82\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eA material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"61138bf4047ac\" class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-61138bf4047ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv data-node=\"61138e649c2cc\" class=\"fl-col-group fl-node-61138e649c2cc\"\u003e\n\u003cdiv data-node=\"61138e649c5c9\" class=\"fl-col fl-node-61138e649c5c9\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"61138bf404a33\" class=\"fl-module fl-module-heading fl-node-61138bf404a33\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eSellingpoint\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"61138bf4049b6\" class=\"fl-col-group fl-node-61138bf4049b6\"\u003e\n\u003cdiv data-node=\"61138bf4049f5\" class=\"fl-col fl-node-61138bf4049f5 fl-col-small\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"61138bf404a63\" class=\"fl-module fl-module-rich-text fl-node-61138bf404a63\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eHigh strength\u003cbr\u003eHigh toughness\u003cbr\u003eHigh rigidity\u003cbr\u003eHigh impact resistance\u003cbr\u003eChemical resistance\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"61149a8d2fe0f\" class=\"fl-col fl-node-61149a8d2fe0f fl-col-small\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"61149a8aece20\" class=\"fl-module fl-module-rich-text fl-node-61149a8aece20\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eHeat resistance\u003cbr\u003eAbrasion resistance\u003cbr\u003eMatte surface effect\u003cbr\u003eExcellent printability\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"6492b63ab40ac\" class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-6492b63ab40ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv data-node=\"6492b63ab46d7\" class=\"fl-col-group fl-node-6492b63ab46d7\"\u003e\n\u003cdiv data-node=\"6492b63ab471d\" class=\"fl-col fl-node-6492b63ab471d\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"6492b63ab475f\" class=\"fl-module fl-module-heading fl-node-6492b63ab475f\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eNotes\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"6492b63ab47a2\" class=\"fl-module fl-module-rich-text fl-node-6492b63ab47a2\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003e1. ePAHT-CF needs to be dried (70℃\/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.\u003cbr\u003e2. The ePAHT-CF line has strong rigidity and is not easy to bend. In the feeding pipe, excessive bending of the wire should be avoided as much as possible.\u003cbr\u003e3. ePAHT-CF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. If conditions permit, you can choose hardened steel extruder gears. If the printing time is long, you need to replace the throat and nozzles.\u003cbr\u003e4. It is recommended to set the skirt to make it better for taking the model from the forming plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Features：\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e【Carbon Fiber Filled Nylon】On the basis of the performance of PA6, 15% high rigidity carbon fiber is added, high strength, high rigidity, impact resistance, self-lubricating wear resistance, excellent chemical resistance, high temperature resistance. Compatible with Most of 3D Printers.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Tangle Free \u0026amp; No Plugging】Full 0.75KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, no cracking, no bubbles. feed smoothly and constantly without clogging the nozzle or extruder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Wide Application】It features with higher strength and rigidity, less warpage and more resistant to wear comparing to the traditional nylon filament. Suitable for strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Vacuumed Sealed Packaging】Net Weight: 0.75KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament Properties Table\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3D PRINTING FILAMENT\u003c\/th\u003e\n\u003ctd\u003eePAHT-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity(g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Distortion Temp(℃,0.45MPa)\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMelt Flow Index(g\/10min)\u003c\/th\u003e\n\u003ctd\u003e19.68(270℃\/2.16kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e173.37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at Break(%)\u003c\/th\u003e\n\u003ctd\u003e8.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e171.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Modulus(MPa)\u003c\/th\u003e\n\u003ctd\u003e5612.41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIZOD Impact Strength(kJ\/m\u003csup\u003e2\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e12.74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003e10\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrintability\u003c\/th\u003e\n\u003ctd\u003e8\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eRecommended printing parameters\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtruder Temperature(℃)\u003c\/th\u003e\n\u003ctd\u003e260 – 300℃ Recommended temperature：280℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature(℃)\u003c\/th\u003e\n\u003ctd\u003e 45 – 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFan Speed\u003c\/th\u003e\n\u003ctd\u003e 0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting Speed\u003c\/th\u003e\n\u003ctd\u003e 40 – 100mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeated Bed\u003c\/th\u003e\n\u003ctd\u003e Optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Build Surfaces\u003c\/th\u003e\n\u003ctd\u003eMasking paper, PVP solid glue, PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eDISCLAIMER: \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eBITS4BOTS LIMITED \u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003enor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"eSun","offers":[{"title":"Natural \/ 1.75mm \/ 0.75kg","offer_id":42591936348315,"sku":"EPAHT-CF175N0.75","price":130.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/products\/50.png?v=1659492655"},{"product_id":"copy-of-esun-epa12-cf-nylon-carbon-fiber-1-75mm-filament-1kg","title":"Sample - eSun ePA12-CF (Nylon + Carbon Fiber) 1.75mm Filament","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool. \u003c\/li\u003e\n\u003cli\u003eThese spools are exposed to moisture. We recommend drying the filament out first before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSamples not available for discount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eePA12 is a product developed based on PA12; low water absorption rate, the size of the printed parts is less affected by humidity and temperature.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e ePA12 has high toughness and high impact resistance, and can be used to print durable parts;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUp to 165% elongation at break and excellent fatigue resistance;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSelf-lubricating and wear-resistant performance, can print mechanical gears;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHigh-temperature resistance, heat distortion temperature of 100℃, can be used for temperature resistant parts;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLow shrinkage, not easy to warp and crack during printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSelling points: low moisture absorption; heat resistance; high toughness; high impact resistance; abrasion resistance; high dimensional stability; excellent printability.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eDISCLAIMER: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBITS4BOTS LIMITED \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003enor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.\u003c\/span\u003e\u003c\/p\u003e","brand":"eSun","offers":[{"title":"Natural \/ 1.75mm \/ 50g","offer_id":42769203724443,"sku":"SEPA12-CF175N","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/products\/Sampleleadphotonylon12_carbonfibre.png?v=1663643963"},{"product_id":"sample-esun-epaht-cf-nylon-carbon-fiber-1-75mm-filament-0-75kg","title":"Sample - eSun ePAHT-CF (Nylon + Carbon Fiber) 1.75mm Filament","description":"\u003cp align=\"left\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool. \u003c\/li\u003e\n\u003cli\u003eThese spools are exposed to moisture. We recommend drying the filament out first before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSamples not available for discount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eA material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃;  low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-5b951ea1c460f\" data-node=\"5b951ea1c460f\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-5b951ea1c4c6a\" data-node=\"5b951ea1c4c6a\"\u003e\n\u003cdiv class=\"fl-col fl-node-5b951ea1c4e58\" data-node=\"5b951ea1c4e58\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-5b951ea1c6c82\" data-node=\"5b951ea1c6c82\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eA material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-61138bf4047ac\" data-node=\"61138bf4047ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-61138e649c2cc\" data-node=\"61138e649c2cc\"\u003e\n\u003cdiv class=\"fl-col fl-node-61138e649c5c9\" data-node=\"61138e649c5c9\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-61138bf404a33\" data-node=\"61138bf404a33\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eSellingpoint\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-61138bf4049b6\" data-node=\"61138bf4049b6\"\u003e\n\u003cdiv class=\"fl-col fl-node-61138bf4049f5 fl-col-small\" data-node=\"61138bf4049f5\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-61138bf404a63\" data-node=\"61138bf404a63\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eHigh strength\u003cbr\u003eHigh toughness\u003cbr\u003eHigh rigidity\u003cbr\u003eHigh impact resistance\u003cbr\u003eChemical resistance\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col fl-node-61149a8d2fe0f fl-col-small\" data-node=\"61149a8d2fe0f\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-61149a8aece20\" data-node=\"61149a8aece20\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eHeat resistance\u003cbr\u003eAbrasion resistance\u003cbr\u003eMatte surface effect\u003cbr\u003eExcellent printability\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-6492b63ab40ac\" data-node=\"6492b63ab40ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-6492b63ab46d7\" data-node=\"6492b63ab46d7\"\u003e\n\u003cdiv class=\"fl-col fl-node-6492b63ab471d\" data-node=\"6492b63ab471d\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-6492b63ab475f\" data-node=\"6492b63ab475f\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eNotes\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-6492b63ab47a2\" data-node=\"6492b63ab47a2\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003e1. ePAHT-CF needs to be dried (70℃\/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.\u003cbr\u003e2. The ePAHT-CF line has strong rigidity and is not easy to bend. In the feeding pipe, excessive bending of the wire should be avoided as much as possible.\u003cbr\u003e3. ePAHT-CF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. If conditions permit, you can choose hardened steel extruder gears. If the printing time is long, you need to replace the throat and nozzles.\u003cbr\u003e4. It is recommended to set the skirt to make it better for taking the model from the forming plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Features：\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e【Carbon Fiber Filled Nylon】On the basis of the performance of PA6, 15% high rigidity carbon fiber is added, high strength, high rigidity, impact resistance, self-lubricating wear resistance, excellent chemical resistance, high temperature resistance. Compatible with Most of 3D Printers.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Tangle Free \u0026amp; No Plugging】Full 0.75KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, no cracking, no bubbles. feed smoothly and constantly without clogging the nozzle or extruder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Wide Application】It features with higher strength and rigidity, less warpage and more resistant to wear comparing to the traditional nylon filament. Suitable for strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e【Vacuumed Sealed Packaging】Net Weight: 0.75KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament Properties Table\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3D PRINTING FILAMENT\u003c\/th\u003e\n\u003ctd\u003eePAHT-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity(g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Distortion Temp(℃,0.45MPa)\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMelt Flow Index(g\/10min)\u003c\/th\u003e\n\u003ctd\u003e19.68(270℃\/2.16kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e173.37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at Break(%)\u003c\/th\u003e\n\u003ctd\u003e8.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e171.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Modulus(MPa)\u003c\/th\u003e\n\u003ctd\u003e5612.41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIZOD Impact Strength(kJ\/m\u003csup\u003e2\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e12.74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003e10\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrintability\u003c\/th\u003e\n\u003ctd\u003e8\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eRecommended printing parameters\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtruder Temperature(℃)\u003c\/th\u003e\n\u003ctd\u003e260 – 300℃ Recommended temperature：280℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature(℃)\u003c\/th\u003e\n\u003ctd\u003e 45 – 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFan Speed\u003c\/th\u003e\n\u003ctd\u003e 0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting Speed\u003c\/th\u003e\n\u003ctd\u003e 40 – 100mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeated Bed\u003c\/th\u003e\n\u003ctd\u003e Optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Build Surfaces\u003c\/th\u003e\n\u003ctd\u003eMasking paper, PVP solid glue, PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDISCLAIMER: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBITS4BOTS LIMITED \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003enor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.\u003c\/span\u003e\u003c\/p\u003e","brand":"eSun","offers":[{"title":"Natural \/ 1.75mm \/ 50g","offer_id":42769213423771,"sku":"SEPAHT-CF175N","price":18.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/products\/Sampleleadphotonylonhightemperature_carbonfibre.png?v=1663643940"},{"product_id":"esun-pla-gf-glass-fiber","title":"eSun PLA-GF (Glass Fiber)","description":"\u003cp\u003e\u003cspan\u003eThe printing filament developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort;\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-node=\"5b951ea1c460f\" class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-5b951ea1c460f\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv data-node=\"5b951ea1c4c6a\" class=\"fl-col-group fl-node-5b951ea1c4c6a\"\u003e\n\u003cdiv data-node=\"5b951ea1c4e58\" class=\"fl-col fl-node-5b951ea1c4e58\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"61138bc21a557\" class=\"fl-module fl-module-heading fl-node-61138bc21a557\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eDescription\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"5b951ea1c6c82\" class=\"fl-module fl-module-rich-text fl-node-5b951ea1c6c82\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eHigh impact resistance and good printability of PLA; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes it suitable for printing gears and can be used as temporary functional parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"61138bf4047ac\" class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-61138bf4047ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv data-node=\"61138e649c2cc\" class=\"fl-col-group fl-node-61138e649c2cc\"\u003e\n\u003cdiv data-node=\"61138e649c5c9\" class=\"fl-col fl-node-61138e649c5c9\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"61138bf404a33\" class=\"fl-module fl-module-heading fl-node-61138bf404a33\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eSellingpoint\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"61138bf4049b6\" class=\"fl-col-group fl-node-61138bf4049b6\"\u003e\n\u003cdiv data-node=\"61138bf4049f5\" class=\"fl-col fl-node-61138bf4049f5 fl-col-small\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"61138bf404a63\" class=\"fl-module fl-module-rich-text fl-node-61138bf404a63\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eHigh rigidity\u003cbr\u003eHigh impact resistance\u003cbr\u003eHigh wear resistance\u003cbr\u003eExcellent printability\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament Properties Table\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3D PRINTING FILAMENT\u003c\/th\u003e\n\u003ctd\u003eePLA-GF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity(g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e1.31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Distortion Temp(℃,0.45MPa)\u003c\/th\u003e\n\u003ctd\u003e56\u003cbr\u003e5\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMelt Flow Index(g\/10min)\u003c\/th\u003e\n\u003ctd\u003e6.36（190℃\/2.16kg）\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e59.27\u003cbr\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at Break(%)\u003c\/th\u003e\n\u003ctd\u003e7.99\u003cbr\u003e1\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e85.01\u003cbr\u003e8\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Modulus(MPa)\u003c\/th\u003e\n\u003ctd\u003e4414.89\u003cbr\u003e8\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIZOD Impact Strength(kJ\/㎡)\u003c\/th\u003e\n\u003ctd\u003e10.16\u003cbr\u003e2\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003e4\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrintability\u003c\/th\u003e\n\u003ctd\u003e9\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eRecommended printing parameters\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtruder Temperature(℃)\u003c\/th\u003e\n\u003ctd\u003e190 – 230℃\u003cbr\u003eRecommended temperature：215℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature(℃)\u003c\/th\u003e\n\u003ctd\u003e 45 – 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFan Speed\u003c\/th\u003e\n\u003ctd\u003e 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting Speed\u003c\/th\u003e\n\u003ctd\u003e 40 – 100mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeated Bed\u003c\/th\u003e\n\u003ctd\u003e Optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Build Surfaces\u003c\/th\u003e\n\u003ctd\u003eMasking paper, PVP solid glue, PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1. ePLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible\u003c\/p\u003e\n\u003cp\u003e2. ePLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced\u003c\/p\u003e\n\u003cp\u003e3. The blowing fan can be properly turned off to improve the model strength\u003c\/p\u003e","brand":"eSun","offers":[{"title":"Natural \/ 1.75mm \/ 1kg","offer_id":43320514314395,"sku":"ePLA-GF175N1","price":49.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/products\/leadphotoPLA-GF.png?v=1680050981"},{"product_id":"esun-epla-cf-filament","title":"eSun ePLA-CF (Carbon Fiber) Filament","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eeSun have made the shift to using cardboard spools. These cardboard spools will have the waxed edge designed to suit being used in the Bambu Labs AMS unit.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy blending imported German organic impregnated short-cut carbon fibers with PLA, we have elevated the material's strength and modulus. The addition of carbon fibers not only reinforces the PLA, but also creates a sophisticated matte finish and a distinctive sandblasted texture reminiscent of carbon fiber. Whether utilized as structural elements or for aesthetic purposes, ePLA-CF excels effortlessly, thanks to its exceptional attributes. Its printing capabilities are exceptional, making it ideal for fast-paced printing projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-64c329727be71\" data-node=\"64c329727be71\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch2 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-64c32988960c1 fl-col-group-nested\" data-node=\"64c32988960c1\"\u003e\n\u003cdiv class=\"fl-col fl-node-64c32988964cb fl-col-small\" data-node=\"64c32988964cb\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-64c329727beb3\" data-node=\"64c329727beb3\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength\u003c\/li\u003e\n\u003cli\u003eMatte appearance\u003c\/li\u003e\n\u003cli\u003eCarbon fiber frosted texture\u003c\/li\u003e\n\u003cli\u003eExcellent printability\u003c\/li\u003e\n\u003cli\u003eHigh speed printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/1AGG1Yt_DtE?si=K-r2K1tBhKITCBZg\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col fl-node-64c3298896515 fl-col-small\" data-node=\"64c3298896515\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-64c3299419f6e\" data-node=\"64c3299419f6e\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qRwwJiLbQuQ?si=x9IKihOS3PiuOx4f\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/b2a822e928.jpg?v=1726550830\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/52734482d4.jpg?v=1726550831\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/ePLA-CF_06.webp?v=1726550830\" alt=\"\"\u003ePlease note:\u003cbr\u003e1) If there is a decrease in printing performance with ePLA-CF, it is recommended to pre-dry (40°C\/ \u0026gt;4H) before printing to achieve the best printing results. During printing, it is advised to use it in conjunction with the eBOX filament box.\u003cbr\u003e2) ePLA-CF filament is relatively rigid and should not be excessively bent. In the feeding pipeline, try to avoid excessive bending of the filament to prevent breakage.\u003cbr\u003e3) ePLA-CF contains carbon fiber, and prolonged use may cause excessive wear on the nozzle and extruder gears. It is recommended to use a hardened steel nozzle or a ruby nozzle, and if possible, opt for hardened steel extruder gears.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"eSun","offers":[{"title":"Black \/ 1.75mm \/ 1kg","offer_id":45529965658267,"sku":"ePLA-CF175B1","price":53.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/leadphotoePLA-CF.png?v=1726638849"},{"product_id":"esun-eabs-gf-filament","title":"eSun eABS-GF (Glass Fiber) Filament","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eeSun have made the shift to using cardboard spools. These cardboard spools will have the waxed edge designed to suit being used in the Bambu Labs AMS unit.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdding glass fiber reinforced materials to ABS and modifying, it strengthens the rigidity and toughness of ABS, it has excellent impact resistance and chemical corrosion resistance, and has good performance in scenes with high strength requirements such as some tooling and fixtures;\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-64c329727be71\" data-node=\"64c329727be71\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch2 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-64c32988960c1 fl-col-group-nested\" data-node=\"64c32988960c1\"\u003e\n\u003cdiv class=\"fl-col fl-node-64c32988964cb fl-col-small\" data-node=\"64c32988964cb\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-64c329727beb3\" data-node=\"64c329727beb3\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cdiv\u003eMatte Texture\u003c\/div\u003e\n\u003cdiv\u003eWear Resistance\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col fl-node-64c3298896515 fl-col-small\" data-node=\"64c3298896515\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-64c3299419f6e\" data-node=\"64c3299419f6e\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cdiv\u003eChemical Resistance\u003c\/div\u003e\n\u003cdiv\u003eHigh Strength\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/xjZCcIU5eUA?si=KrX-PDHItkmF5B9g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e : \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e1) eABS-GF material shrinkage is large, printing should pay attention to heat preservation, printing in a closed box printer.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2) eABS-GF cooling is a little worse, printing can be appropriate to open a little fan to improve the printing effect, or reduce the model of the overhang angle structure; or try to reduce the speed to print.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-GF-en1.png?v=1726552330\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"eSun","offers":[{"title":"Black \/ 1.75mm \/ 1kg","offer_id":45529972080795,"sku":"eABS-GF175B1","price":54.99,"currency_code":"NZD","in_stock":true},{"title":"Cold White \/ 1.75mm \/ 1kg","offer_id":45926500171931,"sku":"eABS-GF175CW1","price":54.99,"currency_code":"NZD","in_stock":true},{"title":"Fire Engine Red \/ 1.75m \/ 1kg","offer_id":45926548766875,"sku":"eABS-GF175FR1","price":54.99,"currency_code":"NZD","in_stock":true},{"title":"Grey \/ 1.75mm \/ 1kg","offer_id":45926548996251,"sku":"eABS-GF175H1","price":54.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/leadphotoeABS-GF.png?v=1726701150"},{"product_id":"esun-eabs-cf-filament","title":"eSun eABS-CF (Carbon Fiber) Filament","description":"\u003cp\u003e\u003cstrong\u003eeSun have made the shift to using cardboard spools. These cardboard spools will have the waxed edge designed to suit being used in the Bambu Labs AMS unit. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdding carbon fiber reinforced materials to ABS and modifying, it strengthens the rigidity and toughness of ABS. eABS-CF has excellent impact resistance and chemical corrosion resistance.\u003c\/span\u003e\u003cspan class=\"fl-heading-text\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-node=\"64c32988960c1\" class=\"fl-col-group fl-node-64c32988960c1 fl-col-group-nested\"\u003e\n\u003cdiv data-node=\"64c32988964cb\" class=\"fl-col fl-node-64c32988964cb\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"64c329727beb3\" class=\"fl-module fl-module-rich-text fl-node-64c329727beb3\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eAdditionally, carbon fiber ABS has the characteristic of being lightweight, with low material density. Printed models are lighter than those made from general materials, making it suitable for the rapid manufacturing of drones, aircraft models, ship models, and more.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe application scenarios for carbon fiber ABS are very diverse, and it can also be used to make 3D printer accessories, tooling fixtures, engineering parts, and electronic and electrical accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHowever, it is important to note that eABS-CF material has a high shrinkage rate. Printing should be done in a well-insulated, enclosed printer. It is recommended to maintain ventilation during the printing process, and if possible, use it in conjunction with an air filter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdditionally, eABS-CF cools a bit less effectively. During printing, fans can be appropriately used to improve print quality. Reducing the overhang angles in the model and lowering the print speed can also optimize the print results to some extent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/improved-rigidity-and-strength.png?v=1726553403\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/improved-rigidity-and-strength.png?v=1726553403\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-CF-Enhance-Heat-Resistance-Performance.png?v=1726553404\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-CF-Enhance-Heat-Resistance-Performance.png?v=1726553404\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-CF-Chemical-Resistance.png?v=1726553404\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-CF-Chemical-Resistance.png?v=1726553404\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBelow are the relevant parameters obtained from multiple tests by eSUN for your reference. If you encounter any issues during the printing process, feel free to contact us.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-CF-Parameter-Information.png?v=1726553403\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/eABS-CF-Parameter-Information.png?v=1726553403\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"64c329727be71\" class=\"fl-module fl-module-heading fl-node-64c329727be71\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch2 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-node=\"64c32988960c1\" class=\"fl-col-group fl-node-64c32988960c1 fl-col-group-nested\"\u003e\n\u003cdiv data-node=\"64c32988964cb\" class=\"fl-col fl-node-64c32988964cb\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv data-animation-delay=\"0.0\" data-node=\"64c329727beb3\" class=\"fl-module fl-module-rich-text fl-node-64c329727beb3\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cdiv\u003eHigh Strength\u003c\/div\u003e\n\u003cdiv\u003eImpact Resistance\u003c\/div\u003e\n\u003cdiv\u003eWear Resistance\u003c\/div\u003e\n\u003cdiv\u003eLightweight\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003ePlease note:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e1) The shrinkage rate of eABS-CF is large, so we advise to print this material in the printer of the closed chamber.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2) When printing ABS-CF, there are three suggestions to make the printing effect better: you can open a little fan to speed up cooling, or reduce the overhang angle structure of the model; Or try slow printing.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"eSun","offers":[{"title":"Black \/ 1.75mm \/ 1kg","offer_id":45529977290907,"sku":"eABS-CF175B1","price":54.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/leadphotoeABS-CF.png?v=1726701098"},{"product_id":"esun-epetg-cf-filament","title":"eSun ePETG-CF (Carbon Fiber) Filament","description":"\u003cp\u003e\u003cspan\u003eeSUN’s PETG-CF material is reinforced with carbon fibers to significantly enhance strength, rigidity, and hardness while reducing warping. It is widely applicable in tooling fixtures, prototyping, electronics, and automotive part manufacturing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eCompared to standard PETG, PETG-CF shows significantly improved rigidity and strength. Testing results reveal that PETG-CF has a flexural modulus of 2500 MPa—an increase of 203%—and a flexural strength improvement of 190%.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePETG-CF offers excellent printability, reducing issues like stringing, oozing, and nozzle clogging during printing, with minimal warping.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cspan\u003ePETG inherently possesses certain waterproof and chemical-resistant properties. With the addition of carbon fibers, its performance stability is further enhanced, providing some resistance to corrosive substances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eUnlike traditional black carbon fiber materials, PETG-CF offers a richer color palette, including DARK GREY, ANTIQUE BRASS, BLACK RED, DARK GREEN, and DARK BLUE. Its carbon fiber composition gives printed models a matte, frosted finish—perfect for users seeking a premium aesthetic.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUsage Recommendations and Precautions\u003c\/span\u003e\u003cspan\u003e: \u003c\/span\u003e\u003cspan\u003eCarbon fiber materials tend to cause greater wear on printer nozzles. When printing with carbon fiber materials, it is recommended to use a hardened steel nozzle. Additionally, the material is sensitive to moisture. It is advised to dry the filament before printing at a temperature of 65°C for at least 8 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"fl-col fl-node-6673c4e0795b7 fl-col-small\" data-node=\"6673c4e0795b7\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-64c329727beb3\" data-node=\"64c329727beb3\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/Outdoor-product-model-using-esun-PETG_CF-3D-printing2.webp?v=1726554342\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/PETG-CF-Parameter-Information.png?v=1736138861\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"eSun","offers":[{"title":"Black \/ 1.75mm \/ 1kg","offer_id":45926585499803,"sku":"ePETG-CF175B1","price":49.99,"currency_code":"NZD","in_stock":true},{"title":"Dark Grey \/ 1.75mm \/ 1kg","offer_id":45529984172187,"sku":"ePETG-CF175AH1","price":49.99,"currency_code":"NZD","in_stock":true},{"title":"Dark Blue \/ 1.75mm \/ 1kg","offer_id":46648251056283,"sku":"EPETG-CF175DU1","price":49.99,"currency_code":"NZD","in_stock":true},{"title":"Black Red \/ 1.75mm \/ 1kg","offer_id":46648251089051,"sku":"EPETG-CF175BR1","price":49.99,"currency_code":"NZD","in_stock":true},{"title":"Dark Green \/ 1.75mm \/ 1kg","offer_id":46648251121819,"sku":"EPETG-CF175DG1","price":49.99,"currency_code":"NZD","in_stock":true},{"title":"Antique Brass \/ 1.75mm \/ 1kg","offer_id":46648251154587,"sku":"EPETG-CF175AB1","price":49.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2060\/5921\/files\/Carbon-Fiber-PETG.png?v=1736138501"}],"url":"https:\/\/www.bits4bots.co.nz\/collections\/carbon-fibre-composite-filament.oembed","provider":"Bits4Bots","version":"1.0","type":"link"}