Skip to product information
1 of 2

eSun

eSun ePAHT-CF (Nylon + Carbon Fiber) 1.75mm Filament 0.75kg

eSun ePAHT-CF (Nylon + Carbon Fiber) 1.75mm Filament 0.75kg

Regular price $130.00 NZD
Regular price Sale price $130.00 NZD
Sale Sold out
Tax included.
Colour
Size
Weight

A material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃;  low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.

A material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.


Sellingpoint

High strength
High toughness
High rigidity
High impact resistance
Chemical resistance

Heat resistance
Abrasion resistance
Matte surface effect
Excellent printability

Notes

1. ePAHT-CF needs to be dried (70℃/>12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.
2. The ePAHT-CF line has strong rigidity and is not easy to bend. In the feeding pipe, excessive bending of the wire should be avoided as much as possible.
3. ePAHT-CF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. If conditions permit, you can choose hardened steel extruder gears. If the printing time is long, you need to replace the throat and nozzles.
4. It is recommended to set the skirt to make it better for taking the model from the forming plate.

Product Features:
【Carbon Fiber Filled Nylon】On the basis of the performance of PA6, 15% high rigidity carbon fiber is added, high strength, high rigidity, impact resistance, self-lubricating wear resistance, excellent chemical resistance, high temperature resistance. Compatible with Most of 3D Printers.

【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.

【Tangle Free & No Plugging】Full 0.75KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, no cracking, no bubbles. feed smoothly and constantly without clogging the nozzle or extruder.

【Wide Application】It features with higher strength and rigidity, less warpage and more resistant to wear comparing to the traditional nylon filament. Suitable for strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.

【Vacuumed Sealed Packaging】Net Weight: 0.75KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.

Filament Properties Table
3D PRINTING FILAMENT ePAHT-CF
Density(g/cm3) 1.4
Heat Distortion Temp(℃,0.45MPa) 190
Melt Flow Index(g/10min) 19.68(270℃/2.16kg)
Tensile Strength(MPa) 173.37
Elongation at Break(%) 8.93
Flexural Strength(MPa) 171.64
Flexural Modulus(MPa) 5612.41
IZOD Impact Strength(kJ/m2) 12.74
Durability 10/10
Printability 8/10
Recommended printing parameters
Extruder Temperature(℃) 260 – 300℃ Recommended temperature:280℃
Bed temperature(℃)  45 – 60°C
Fan Speed  0%
Printing Speed  40 – 100mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.

Shipping & Returns

We endeavor to ship out all orders placed before 2pm on the same day during weekdays. Orders placed after our courier driver has been will be processed the following working day.

Orders placed over the weekend and public holidays are processed for shipment on the next available working day.

You will be issued with a tracking number to self monitor your shipment. Once your parcel has left our premises, there isn't any further info that we have access to aside from what shows up from your tracking number and we are unable to speed up the process.

Sorry we do not deliver to PO boxes.

Check our Refund and Returns Policy here

Disclaimer

DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries

No reviews
View full details