eSun PLA+1.75mm Refilament 1 kg
|Diameter:||1.75mm (+/- 0.05mm)|
|Extrusion Temp||205 ~ 225 C|
|Build Plate Temp (OPTIONAL)||No heat/ (60 ~ 80) C|
|Refilament PLA+ is essentially regular PLA+ but comes without the plastic spools. Help save the environment by re using your old spools. Use a 5mm allen(hex) key to unscrew an old eSun spool. Otherwise head to the link below for instructions and the STL file to print your own spool.
Biomaterial extracted from corn grain, natural degradable and pollution-free for environment; high rigidity, good gloss and transparency; printing process is non-toxic and tasteless, no curling.
PLA+ has additional additives added into its regular PLA. These additional additives improve the strength of the filament (at least 2 times tougher than regular PLA). PLA has a higher tendency to snap under pressure, where PLA+ is more likely to bend. It also gives a smoother surface finish. PLA+ is also better with dealing with bridging and overhangs so there is less stringing and supports are not required as often.
PLA+ is our best seller as it is a very easy to use filament. You will need to print at a slightly higher temperature than regular PLA. We recommend PLA+ especially for those larger prints.
- Neat winding, avoid filament tangle
- Reduce the waste of empty spools