Reflow Recycled PETG - Seaglass Collection 2.85mm

The Seaglass Collection

Print with these unique gems and explore the rich spectrum of translucent colours that each one provides at different infills and light settings. All available in rPETG and produced using locally recycled plastic.

rPETG. The strong, silent type.

PETG is a Glycol Modified version of Polyethylene Terephthalate (PET). It has the best of both worlds, combining the functionality of ABS and the easy printing of PLA in one material. It’s also a highly common plastic in recycling ecosystems globally, so we can consistently source great quality streams.

Great strength and impact resistance

High temperature tolerance

Excellent visual qualities

TECHNICAL DATA SHEET
Name : Recycled PETG
Chemical name : Polyethylene Terephthalate - Glycol Modified
Source of plastic : The Netherlands
Description : Our flagship rPETG is sourced from leading local recyclers.
It’s durable and easy to use, with exceptional visual and
mechanical performance.

FILAMENT SPECIFICATIONS
Diameter : 2.85 mm. ±0.07mm
Roundness : ≥ 98%
Net filament weight : 1 KG
Filament length : ~137m

PRINTER SETTING RECOMMENDATION
Try our quick start guide to help get the best results. These settings are a good steer for printing with this material across a variety of devices. However, optimum settings may vary between printers.
Nozzle temperature : 225ºC ±10ºC
Bed temperature : 75ºC ±5ºC
Bed modification : glue / hairspray
Fan speed : 30 - 100% (varies based on print geometry)
Print speed : 30 - 50 mm/s
Retraction distance : 10 mm
Retraction speed : 35-45 mm/s
Drying recommendation : 55°C for 3 to 4 hours in a hot air or vacuum oven

The Seaglass Collection is inspired by settings of wild, natural beauty and our fleeting memories of these environments.

View this post on Instagram

A post shared by Reflow (@reflowfilament)

MATERIAL PROPERTIES

SAMPLE PREPARATION AND TESTING CONDITIONS
Sample preparation conditions:
Ultimaker 2+ with 0.4 mm nozzle was applied for preparing both tensile
and flexural specimens.
Line width: 0.35 mm | layer height: 0.2 mm | printing speed: 20 mm/s | retraction distance and speed: 9 mm and 35 mm/s | printing temperature: 230 ºC | fan speed: 40% | infill percentage: 100% | outline overlap: 35%
Testing conditions:
Five samples were tested and the value shared was the average value.
For tensile specimens, they were printed flatly (x-y direction ) and the printing direction
was in line with the tensile stretching direction. As for the flexural specimens, the printing direction was perpendicularly to the test direction.

DISCLAIMER
The values and recommendations provided herein are given or accepted at your own risk. In viewof variations in maintenance, processing, and neither Reflow nor its a"liates make any warranty relating to it or because of it. Neither Reflow nor its a"liates shall be responsible for the use of this information, or of any product, method or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No
warranty is made of the merchantability or fitness of any product; and nothing herein waives any of Reflow’s conditions of sale. Specifications are subject to adaptation without prior notice