Bambu Labs
Bambu Lab A1 Mini Combo 3D Printer (AMS Lite Included)
Bambu Lab A1 Mini Combo 3D Printer (AMS Lite Included)
Couldn't load pickup availability
We are proud to announce that we have been assigned as an affiliated reseller in partnership with an authorised New Zealand distributor.
It comes with full warranty and local support so you can buy with peace of mind. These are not parallel imported machines.
We at BITS4BOTS have been serving the 3d printing industry since 2016. We have fulfilled over 5000 orders and supplied over 45000 spools of filament.
We have a physical storefront located in Mt Roskill, Auckland where you can find a range of filaments and printers on display for demonstration purpose. You can walk in without an appointment during normal business hours.
We run a 3d printing service and have the expertise to help you in terms of filament materials, design consideration, troubleshoot any printer issues and maintenance of your 3D Printers.
Product Features
- Full-auto Calibration.
- 4-Color Printing with AMS lite.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
A1 mini Tech Specs
| Item | A1 mini Specification | |
| Body | Build Volume(W*D*H) | 180*180*180 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm |
|
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate |
| Max Build Plate Temperature | 80°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Not Recommended | |
| Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg | |
Â
1.What's the difference between AMS and AMS lite? Does the AMS lite work with any Bambu printer or even other (brand) printers?
A: AMS is enclosed and the AMS lite is non-enclosed.
AMS is incompatible with the A1 mini. If you want a multi-color print using A1 mini, you must use the AMS lite.
AMS lite is incompatible with the X1 or P1 printer and other (brand) printers. If you want a multi-color print using an X1 or P1 printer, you must use AMS. For more details, please check here.
2.What materials can the A1 mini print?
A: The A1 mini can print most of the materials on the market that don't require an enclosure, such as PLA, PETG, TPU, and their support filament. It is not recommended to print filaments such as ABS, ASA, PC, PA,and PET that require higher bed and chamber temperatures.For more details, please check here.
3.Will my order include the Mystery box components kit?
A: For Mystery box components kit, we have prepared a limited quantity of mystery box component kits for complimentary distribution to early purchasers of the A1 mini Combo. First come, first served. The Mystery box components kit cannot be returned or exchanged, nor can it be used as a reason for returning or exchanging the 3D printer.
4.What is the maximum print size of the A1 mini?
A: 180 * 180 *180 mm. For more product specifications , please refer to this page. For more details, please check here.
Shipping & Returns
Shipping & Returns
We endeavor to ship out all orders placed before 2pm on the same day during weekdays. Orders placed after our courier driver has been will be processed the following working day.
Orders placed over the weekend and public holidays are processed for shipment on the next available working day.
You will be issued with a tracking number to self monitor your shipment. Once your parcel has left our premises, there isn't any further info that we have access to aside from what shows up from your tracking number and we are unable to speed up the process.
Sorry we do not deliver to PO boxes.
Check our Refund and Returns Policy here
Disclaimer
Disclaimer
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries
