Bambu Labs
Bambu Lab 3D Effect Plate
Bambu Lab 3D Effect Plate
Couldn't load pickup availability
Bambu 3D Effect Plate
Need some extra pizazz for your prints? Bambu 3D Effect Plate can transfer interesting surface textures to your printed objects. There are 4 exciting textures, ranging from Carbon Fiber all the way to Starry, Galaxy, and Diamond! Want to make your prints stand out? Get Bambu 3D Effect Plate and unlock a world of textural possibilities!
Galaxy Surface
The Galaxy Surface transfers a vibrant galaxy rainbow effect on the first layer of the print, which glitters and changes color depending on the angle. It works best with silk or shiny filaments to take advantage of the pattern transfer.
Carbon Fiber Surface
The Carbon Fiber has a very slight texture similar to real Carbon Fiber. The pattern transfers to the first layer of the 3D printed model, creating a 3D effect with a distinctive texture, especially when used with a gray carbon filament color.
Starry Surface
The Starry Surface transfers a rainbow kaleidoscope starry effect on the first layer of the print, which glitters and changes color depending on the angle. It works best with silk or shiny filaments to take advantage of the pattern transfer.
Diamond Surface
The Diamond Surface imprints a diamond pattern on the first layer with a mix of glossy and matte shapes applied to the smooth surface. It's best used with silk or shiny filaments, to take advantage of the pattern transfer.
Note
1. For best results, we recommend applying the 3D effect spare sheet only on the official steel plate from Bambu Lab.
2. Please set the plate type to Smooth PEI/High Temp Plate and carefully follow the Heatbed Recommended Settings when using the Bambu 3D Effect Plate. For X1/X2/P2 Series users, please disable the Build Plate Position Detection in 'Settings ->Print Options -> Enable the detection of build plate position' when printing with the 3D Effect Plate to avoid error reports.
3. The 3D effect patterns require a clean surface to remain visible. Grease can cause the patterns to disappear. It is essential to keep the surface clean. We recommend using hot water and detergent for cleaning, and avoid touching the surface.
Considerations
1. Due to reflections, the LIDAR calibration will not work as expected when using Effect Plates. We recommend skipping the LIDAR calibration sequence, or calibrating with a regular plate.
2. The 3D Effect Spare Sheets are considered consumables. To prolong the lifespan of the transfer textures, try placing your print objects on different areas of the sheet.
3. Do not apply glue to the sheet surface.
4. Pay close attention when using a scraper to remove prints, to avoid damaging the sheet surface.
Recommended Settings
1. We recommend using PLA and TPU filament for printing. Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements.Please select Smooth PEI Plate/High Temp Plate for the Plate Type in Bambu Studio.
| Filaments | Heatbed Temperature |
| PLA | 60~65℃ |
| TPU | 35~45℃ |
-Genuine Bambu Lab build plate with dual-sided texture finish
-Adds a unique surface effect to printed parts
-Pre-applied sheets on both sides for ready-to-use convenience
Note: Effect Sheet- Pre-applied on both sides.
Shipping & Returns
Shipping & Returns
We endeavor to ship out all orders placed before 2pm on the same day during weekdays. Orders placed after our courier driver has been will be processed the following working day.
Orders placed over the weekend and public holidays are processed for shipment on the next available working day.
You will be issued with a tracking number to self monitor your shipment. Once your parcel has left our premises, there isn't any further info that we have access to aside from what shows up from your tracking number and we are unable to speed up the process.
Sorry we do not deliver to PO boxes.
Check our Refund and Returns Policy here
Disclaimer
Disclaimer
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries
