eSun ePLA-ST 1.75mm Filament 1 kg

  • $44.99

Only 3 left!

 eSuns's new and improved PLA. See below to see exactly how

 Specification

Diameter: 1.75mm (+/- 0.05mm) 
Extrusion Temp 210-230℃
Build Plate Temp  (OPTIONAL) 45 - 60°C
 
It has the characteristics of high impact resistance, high elongation at break, high bonding strength and high printing accuracy. There is no need to heat the bed or print in a closed chamber, and no warping when print large models.

Comparison of physical performance indicators:

Project

PLA

PLA+

ePLA-ST

Appearance

white

white

white

Tensile Strength

78Mpa

63Mpa

34.3Mpa

Elongation at break

14%

20%

90%

Bending strength

90Mpa

74Mpa

43Mpa

Flexural modulus

1984Mpa

1934Mpa

1477Mpa

Notch impact

5.6

9

63



Print performance comparison:

 

PLA

PLA+

ePLA-ST

Conclusion

Surface finish

Normal

No obvious layering

No obvious layering

ePLA-ST≈PLA+>PLA

Hole column fitting model

(The smaller the value, the better)

0.3mm

0.3mm

0.3mm

ePLA-ST=PLA+=PLA

Hanging model

(The larger the value, the better)

<45°

<60°

<70°

ePLA-ST>PLA+>PLA

Suspension bridge

(The larger the value, the better)

40mm

50mm

50mm

ePLA-ST=PLA+>PLA

Note: Printing test conditions: nozzle 215℃; bed 45℃; speed 40mm/s


We Also Recommend