eSun
eSun ABS 1.75mm Filament
eSun ABS 1.75mm Filament
Couldn't load pickup availability
eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock.
PLEASE NOTE for Bambu Labs AMS users - The Cardboard spools will be able to be used in the AMS with the help of the ring adapters. The link to download the STL for the adaptors can be found above. You will however NOT be able to close the lid of the AMS while in use. The latest batch of eSun spools have
ABS filament is a material with low cost and good mechanical properties; ABS plastic has good toughness and impact resistance, which can print strong and durable parts
ABS is more durable and has better elongation at break than PLA, however requires more work to get right. Due to some of the fumes that are let off while printing with ABS, we recommend keeping the printer in a well ventilated room. We recommend using an enclosure as ABS is susceptible to warping. To help aid the filament stick to the bed, we recommend using either a glue stick, or hair spray.
- Strong, durable filament
- Heated bed necessary ( Enclosure recommended)
- Low shrinkage rate
- Uniform diameter
- Raft Recommended
ABS material has large shrinkage rate, so please pay attention to heat preservation when printing, and print it in printers with closed chamber. We have achieve better when pre hearing the chamber to build the chamber temperature before printing
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ABS |
| Density(g/cm3) | 1.04 |
| Heat Distortion Temp(℃,0.45MPa) | 78 |
| Melt Flow Index(g/10min) | 12(220℃/10kg） |
| Tensile Strength(MPa) | 43 |
| Elongation at Break(%) | 22 |
| Flexural Strength(MPa) | 66 |
| Flexural Modulus(MPa) | 1177 |
| IZOD Impact Strength(kJ/㎡) | 29 |
| Durability | 8/10 |
| Printability | 8/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 230 – 270℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 95 – 110°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | High temperature tape, PVP solid glue |
Shipping & Returns
Shipping & Returns
We endeavor to ship out all orders placed before 2pm on the same day during weekdays. Orders placed after our courier driver has been will be processed the following working day.
Orders placed over the weekend and public holidays are processed for shipment on the next available working day.
You will be issued with a tracking number to self monitor your shipment. Once your parcel has left our premises, there isn't any further info that we have access to aside from what shows up from your tracking number and we are unable to speed up the process.
Sorry we do not deliver to PO boxes.
Check our Refund and Returns Policy here
Disclaimer
Disclaimer
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries
