eSun PLA+1.75mm Filament 1kg

  • $34.99


 Please select the colour option and not just the picture when adding to cart
'White" is more like a milky white where "Cold White' is more snow like. Cold white here does come with a spool attached.

Biomaterial extracted from corn grain, natural degradable and pollution-free for environment; high rigidity, good gloss and transparency; printing process is non-toxic and tasteless, no curling.

PLA+ has additional additives added into its regular PLA. These additional additives improve the strength of the filament (at least 2 times tougher than regular PLA). PLA has a higher tendency to snap under pressure, where PLA+ is more likely to bend. It also gives a smoother surface finish. PLA+ is also better with dealing with bridging and overhangs so there is less stringing and supports are not required as often. 

PLA+ is our best seller as it is a very easy to use filament. You will need to print at a slightly higher temperature than regular PLA. We recommend PLA+ especially for those larger prints.
Have a limited amount of 3kg spools available in Black, White and Grey

3kg Spool size -
The outer diameter: 270mm
The hole in the middle diameter: 52.5mm
The width of the spool: 104mm

 Specification

 
Diameter: 1.75mm (+/- 0.05mm)
Extrusion Temp 205 ~ 225 C
Build Plate Temp  (OPTIONAL) No heat/ (60 ~  80) C

We Also Recommend