eSun WATER WASHABLE resin for LCD/DLP 3D Printing

Please select the colour from the pictures above

eSUN Water Washable 3D Printer Rapid Resin 

Water Washable Resin is upgraded on the basis of general resin, lower odor than most of general resin, suitable for fast prototyping with art and craft, home decoration, architecture, jewelry, dentistry, animation, and so on.

You can clean the printed model with water directly, which effectively protect your body from contacting alcohol and other industrial solvent.

Specifications of Water Washable Resin: 

Net Weight: 500g/1000g

Material: Resin Monomer & Photo Initiator

7 Available Colors: Grey, Transparent, White, Black, Orange, Yellow, Skin

Recommended Print Parameter: 

Bottom Exposure Time: 20-30s

Normal Exposure Time: 6s

Print Thickness: 0.025-0.05mm

Number of Bottom Layers: 3-8

Warm Tips: The above are the exposure parameters on the LCD3.0 machine. Actural print parameter is based on the 3D printer model you use.

High Precision: 

Methacrylate monomers reduce volume shrinkage during the photocuring process, which ensures the high precision of the print model with smooth finish.

Excellent Fluidity: 

Low viscosity and good fluidity make it easy to separate the cured resin from the uncured one; Cutting down the printing time and improving the success rate on printing.

Water Washable: 

The printed model does not need to be cleaned by alcohol, no pungent alcohol odor, low skin irritation.

It takes less time to cure the resin, time-saving and high successful printing rate.

High Compatibility: 

eSUN Water Washable Resin is suitable for rapid prototyping with arts and crafts, home decoration, architecture, jewelry, dentistry, animation, etc.

How to Use: 

1) Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.

2) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.

3) Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.

4) Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect.

How to Storage: 

1) Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin.)

2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment.

3) The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Safe Package: 

Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.

Please Notice: 

The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.

Please follow the link below for more information and Technical Data Sheet:

https://www.esun3d.com/water-washable-resin-product/

DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.

We also stock following types of resins for LCD/DLP 3D Printers:

eSun PLA Resin

eSun PLA Pro Resin

eSun Standard Resin

eSun Water Washable Resin

eSun ABS Like - Hard Tough Resin

eSun High Precision - Red Wax Resin

eSun TPU like - Flexible / Elastic Resin

eSun Castable Resin for Jewelry

eSun Castable Resin for Dental

eSun Dental Mold / Model Resin

eSun High Temperature Resin