Sample - eSun ePA-CF (Nylon + Carbon Fiber) 1.75mm Filament
Sample - eSun ePA-CF (Nylon + Carbon Fiber) 1.75mm Filament
Want to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go.
- These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.
- These spools are exposed to moisture. We recommend drying the filament out first before use.
Samples not available for discount
Developed based on nylon 6/66 copolymer, adding 20% carbon fiber greatly enhances the strength, rigidity and toughness of nylon, and can replace metal materials in many occasions; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance make it suitable for printing durable parts. High temperature resistance, heat deformation temperature up to 155℃; Low shrinkage, it is not easy to warp and crack when printing, and the surface of printed models is matte and delicate.
DOWNLOAD TECHNICAL DATA SHEET HERE.
DOWNLOAD eSun Product Guide HERE.
NOTE:
1. Dry the filaments (70℃/> 12h) before printing to achieve the best printing effect. It is recommended to use them together with eBOX when printing.
2. PA-CF tends to be highly rigid and excessive force while feeding through extruder may cause it to bend and break.
3. It is highly recommended to use hardened steel nozzle while printing with ePA-CF. It can be highly abrasive on standard brass nozzle and cause them to wear out. Similarly, avoid using extruder with brass gears.
Some videos to consider watching to help you get started with printing PA-CF filaments.
https://www.youtube.com/watch?v=xjmwNh4Hqfk
https://www.youtube.com/watch?v=A6Df4I4SXJE
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.
Carbon fiber reinforced nylon filament High Strength, High Rigidity, Good Toughness, Wear Resisting Good flame resistance, Flame-retardant Level: UL94-V2; Print temperature range: 260~300℃ Print Base temperature: 80℃ Print Speed:30-60 mm/s; Move Speed:90-150mm/s Product Features:
|
Shipping & Returns
Shipping & Returns
We endeavor to ship out all orders placed before 2pm on the same day during weekdays. Orders placed after our courier driver has been will be processed the following working day.
Orders placed over the weekend and public holidays are processed for shipment on the next available working day.
You will be issued with a tracking number to self monitor your shipment. Once your parcel has left our premises, there isn't any further info that we have access to aside from what shows up from your tracking number and we are unable to speed up the process.
Sorry we do not deliver to PO boxes.
Check our Refund and Returns Policy here
Disclaimer
Disclaimer
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries